The EPEVER Tracer AN Series Solar Charge Controller is actually a hugely economical photo voltaic controller made for off-grid solar programs. Based on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and method balance for an array of photovoltaic (PV) apps.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Cost Controller technological know-how for superior solar energy harvesting. Crucial capabilities contain:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for Improved battery everyday living.
Liquid crystal display Display screen with serious-time data checking.
Various Load Command Modes including manual and timer.
Comprehensive Digital Protections against overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Stage-by-Move Information to Creating the EPEVER Tracer AN Collection Controller
1. Unboxing and Planning the Controller
Assure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer handbook.
Validate the model amount and voltage rankings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Decide on a effectively-ventilated, dry place near the battery bank.
Safe the Tracer AN controller using the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly stick to correct safety protocols and make sure the technique is driven off prior to connecting factors.
Move one: Link the battery terminals towards the charge controller (positive to favourable, adverse to damaging).
Step two: Join the solar panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Energy on the controller by connecting the battery initially.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Handle.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time checking using the MT50 distant meter.
Knowledge is often logged by way of the RS485 interaction port employing software program which include Solar Station PC.
Remote checking is achievable Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Difficulties
Issue one: No Ability Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: In excess of-Voltage Protection
Confirm the solar array’s voltage rating.
Change program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations within the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation makes certain:
Greater Effectiveness: Reduced Electrical power losses throughout conversion.
Improved Dependability: Secure general performance underneath variable loads.
More time Battery Daily life: Constant and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is surely an Extraordinary option for optimizing solar energy era and lengthening battery existence. By following the above setup manual, More info end users can make certain most efficiency and procedure longevity.