The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a highly effective solar controller suitable for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it assures optimized Electricity conversion and process steadiness for a wide array of photovoltaic (PV) purposes.
Vital Features from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for excellent solar Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery daily life.
Liquid crystal display Display screen with serious-time knowledge monitoring.
Multiple Load Manage Modes including handbook and timer.
Comprehensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Tutorial to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Planning the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller using the presented mounting brackets.
Sustain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually follow suitable security protocols and ensure the procedure is run off ahead of connecting elements.
Stage one: Hook up the battery terminals for the charge controller (good to positive, destructive to adverse).
Stage 2: Join the solar panel array towards the PV enter terminals.
Action three: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD display to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Manual, timer, light-weight Management.
5. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time monitoring using the MT50 distant meter.
Info can be logged by means of the RS485 communication port applying software package including Solar Station visit here Laptop.
Remote checking is possible While using the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Concern one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Verify the photo voltaic array’s voltage score.
Adjust system parameters if essential.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations inside the menu.
Benefits of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how assures:
Bigger Efficiency: Minimized Power losses all through conversion.
Enhanced Dependability: Secure efficiency beneath variable loads.
Extended Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is definitely an Fantastic choice for optimizing solar power era and increasing battery existence. By pursuing the above setup information, users can make certain utmost efficiency and program longevity.